ROTASTOP SU1MZ(A) STOPPED MOTION MONITOR - Specification
An 18mm diameter, fully self contained unit, incorporating a proximity sensor & associated stopped motion circuitry. The unit detects a stud on a shaft and the output maintains it's 'on' state whilst the target is moving. Ideal for chain or gear driven shafts.
Supply
24-240V ac/dc

Output

2 wire FET. Maximum current 200mA, Vdrop= 8V max.

Output State

Output ON (energised) while shaft running and at least one pulse is received within every 4 seconds.

Operating range
8mm
Time delay
4 seconds. Output de-energises after this time period if no input is detected. Alternative delays available to order.
Start-up delay
4 seconds.On application of supply, output energises to allow machinery to achieve normal running speed.

Hysterisis

15% of operating range
Ambient temp.
-15°C to +50°C
IP Rating
IP65
No. of Cores
2
Weight
260g
Note: SU1MZ(A) is also available with Gas Hazard approval - unit becomes SU1MZ(AG).
Certification

 




© SYNATEL

This is one page of our multi-page website. If you have landed here by accident click on the 'SYNATEL' logo above to view our full site. e&oe.

Synatel:
Design, manufacture & sell a range of sensors aimed at solving detection problems within the day to day working environment.
Photoelectric sensors: retro-reflex, reflex and through beam versions.
Proximity sensors: both inductive and capacitive.
Speed monitors: inductive sensor based, monitoring rotating or reciprocating equipment and providing a signal at stop, under or over speed.
Digital diplay: used for counting, batching routing or speed indication, control applications.
Level controls: capacitance or inductive level sensors ideal for liquids, powders or granular solids.

Our manufacturing facility also enables us to offer a full bespoke design and manufacturing service, if required.