STEP-A-MATIC SML1 ROTARY PADDLE LEVEL PROBE - Specification
The Step-a-Matic is a patented rotary paddle level probe using a new and unique gearless & clutchless drive system.
The Step-a-Matic uses a unique stepper motor drive instead of the usual synchronous motor. This utilises a direct drive eliminating the need for gearboxes & clutches, and makes the drive virtually indestructible, It also allows the motor to rotate in both direction, to avoid compaction of light material. The paddle also 'shakes at the end of it's rotation cycle to discard clinging material. Variable torque setting allows one paddle to suit virtually all applications, and paddles can be extended upto 2m in length. Torque & Rotation are monitored for fail-to-safe operation.
Supply
24V dc, 90-260V ac 50/60Hz
Load
6VA max ac, 50 mA max dc
Supply fuse/cct breaker
5A max.
Ambient Temp.
-10°C to +50°C
Output
SPCO relay rated @ 2.5A 240V ac non-inductive
Output Mode
Switch selectable for normally ON (high level),
or normall OFF (low level)
Calibration
Electronic torque control potentiometer.
Indicators
LED shows power ON.
Time delay
Adjustable via potentiometer. 0-30 sec,
material arriving & material leaving.
Mounting
1" BSP
Protection
IP65
Weight

Step-a-Matic SML1 - 2Kg
Twin blade paddle - 200g
1mtr extension - 200g
2mtr extension - 325g



© SYNATEL


This is one page of our multi-page website. If you have landed here by accident click on the 'SYNATEL' logo above to view our full site. e&oe.

Synatel : Cannock : UK | +44 (0) 1543 277003 | www.synatel.co.uk
Design, manufacture & sell a range of sensors aimed at solving detection problems within the day to day working environment.
Photoelectric sensors: retro-reflex, reflex and through beam versions.
Proximity sensors: both inductive and capacitive.
Speed monitors: inductive sensor based, monitoring rotating or reciprocating equipment and providing a signal at stop, under or over speed.
Digital diplay: used for counting, batching routing or speed indication, control applications.
Level controls: capacitance or inductive level sensors ideal for liquids, powders or granular solids.

Our manufacturing facility also enables us to offer a full bespoke design and manufacturing service, if required.