MODUSLIP RMR48/T - OVER/UNDER SPEED MONITOR - Specification
An Underspeed or Overspeed module in a 48mm DIN standard enclosure. Single pushbutton calibration for set running speed and start-up delay. Unit signals a fault condition at 20% from set running speed. Under or overspeed operation selected by a link.
Supply
110/230V ac, 24V dc output

Output

SPCO relay 5A 240V max. non-inductive

Output State

Output energised (ON) at set running speed, de-energised if rotation reduces by 20% or more below set speed

Operating range
Dependant upon sensor used
Calibration
Start-up delay and set running speed user programmable via pushbutton
Start-up delay
Programmable start-up delay. Output energised for set time period and ignores incoming pulses, allows machinery time to reach running speed. Max. 30 seconds

Indication

LED indication of input pulses and output energised
Input
npn transistor or contact input. Any Synatel dc inductive proximity sensor is suitable
Weight
210g

 




© SYNATEL

This is one page of our multi-page website. If you have landed here by accident click on the 'SYNATEL' logo above to view our full site. e&oe.

Synatel:
Design, manufacture & sell a range of sensors aimed at solving detection problems within the day to day working environment.
Photoelectric sensors: retro-reflex, reflex and through beam versions.
Proximity sensors: both inductive and capacitive.
Speed monitors: inductive sensor based, monitoring rotating or reciprocating equipment and providing a signal at stop, under or over speed.
Digital diplay: used for counting, batching routing or speed indication, control applications.
Level controls: capacitance or inductive level sensors ideal for liquids, powders or granular solids.

Our manufacturing facility also enables us to offer a full bespoke design and manufacturing service, if required.

Synatel:
Design, manufacture & sell a range of sensors aimed at solving detection problems within the day to day working environment.
Photoelectric sensors: retro-reflex, reflex and through beam versions.
Proximity sensors: both inductive and capacitive.
Speed monitors: inductive sensor based, monitoring rotating or reciprocating equipment and providing a signal at stop, under or over speed.
Digital diplay: used for counting, batching routing or speed indication, control applications.
Level controls: capacitance or inductive level sensors ideal for liquids, powders or granular solids.

Our manufacturing facility also enables us to offer a full bespoke design and manufacturing service, if required.