RLL48 MODUALR RESISTANCE LEVEL SYSTEM - Specification
Consists of control module (panel mountable) and separate probe unit. Two probes can be used with one control module to provide sequence filling/emptying over given distance. Choice of high level control (RLM48/T) or low level control (RLM48/LT). Adjustable time delay prevents spurious operation from liquid splashing.
Supply
110/230V ac
Load
1.5A max, 50 mA dc
Ambient Temp.
-15°C to +45°C for control module
Output
SPCO relay rated @ 2.5A 240V ac non-inductive
Output Mode
RLM48/T - normally ON (high level)
RLM48/LT - normally OFF (low level)
Calibration
Analogue rotary over range of 500 ohms to 30K ohms
Indicators
Output LED
Mounting
11 pin relay base for RLM modules
Protection
IP40 for RLM modules, IP65 typically for probes
Code/Weight

RLM48/T, RLM48/LT - 220g
RLP1 - 600g + probe rod
MRP2 - 300g




© SYNATEL


This is one page of our multi-page website. If you have landed here by accident click on the 'SYNATEL' logo above to view our full site. e&oe.

Synatel : Cannock : UK | +44 (0) 1543 277003 | www.synatel.co.uk
Design, manufacture & sell a range of sensors aimed at solving detection problems within the day to day working environment.
Photoelectric sensors: retro-reflex, reflex and through beam versions.
Proximity sensors: both inductive and capacitive.
Speed monitors: inductive sensor based, monitoring rotating or reciprocating equipment and providing a signal at stop, under or over speed.
Digital diplay: used for counting, batching routing or speed indication, control applications.
Level controls: capacitance or inductive level sensors ideal for liquids, powders or granular solids.

Our manufacturing facility also enables us to offer a full bespoke design and manufacturing service, if required.