DIGIMHO DRL1 SELF CONTAINED RESISTANCE LEVEL PROBE - Specification
Resistance level control probe, fully self contained. Especially suited for use with highly conductive, sticky materials such as carbon black, treacle, molasses etc.
Measuring range covers 500 ohms to 20K ohms. Powershield to automatically compensate for build up of conductive material around probe, preventing false signalling.
Supply
110/230V ac
Load
1.5A max
Ambient Temp.
-10°C to +50°C
Output
SPCO relay rated @ 2.5A 240V ac non-inductive
Output Mode
Switch selectable for normally ON (high level),
or normall off (low level)
Calibration
6 x in-line DIP switches
Indicators
Power, timer and output LED's
Mounting
1" BSP
Protection
IP65
Compensator
Power shield compensates for material build up between probe and vessel wall (earth/ground). Prevents false signalling. Ideal for sticky or viscous materials
Weight

DRL1 - 2Kg
plus probe rod.




© SYNATEL


This is one page of our multi-page website. If you have landed here by accident click on the 'SYNATEL' logo above to view our full site. e&oe.

Synatel:
Design, manufacture & sell a range of sensors aimed at solving detection problems within the day to day working environment.
Photoelectric sensors: retro-reflex, reflex and through beam versions.
Proximity sensors: both inductive and capacitive.
Speed monitors: inductive sensor based, monitoring rotating or reciprocating equipment and providing a signal at stop, under or over speed.
Digital diplay: used for counting, batching routing or speed indication, control applications.
Level controls: capacitance or inductive level sensors ideal for liquids, powders or granular solids.

Our manufacturing facility also enables us to offer a full bespoke design and manufacturing service, if required.