|
Capacitance
level control system, consists of 3 parts: Control unit DRC105(A),
signal Transverter DCT2, probe head/probe. Type depends upon application/temperature.
RPP1(polyproylene) upto 125°C, RPK1 (PEEK) upto 250°C.
LED display shows calibration & run mode readings. Power shield
compensator, prevents false signalling due to material build-up
on probe rod. The DMR2 is ideal for all level control application
where vibration and/or temperature prevent the use of a fully
self contained controller.
|
| Supply |
110/230V
ac, 24V dc
|
| Load |
1.5A
max, 50 mA dc
|
| Ambient
Temp. |
-10°C
to +50°C for DRC105(A). Probe head depends upon type used
(upto 250°C)
|
| Probe
Heads |
RPP1:
Polypropylene suitable upto 125°
RPK1:PEEK suitable upto 250°C..........
|
| Output |
SPCO
relay rated @ 2.5A 240V ac non-inductive
|
| Output
Mode |
Switch
selectable for normally ON (high level),
or normall off (low level)
|
| Calibration |
Membrane
pushbuttons with LED display. Automatic calibration with full
manual override
|
| Indicators |
Digital
display for calibration and run mode settings, plus power, timer
and output LED's
|
| Mounting |
1"
BSP for RPP1/RPK1, DIN rail for DRC105(A)
|
| Protection
|
DRC105(A)
- IP40, IP65 - all other parts
|
| Compensator |
Power
shield compensates for material build up between probe and vessel
wall (earth/ground). Prevents false signalling. Ideal for sticky
or viscous materials
|
| Code/Weight |
DRC105(A)
- 275g
DCT2 - 120g
RPK1/RPP1 - 410g
plus probe rod.
|
| Approval |
ATEX 1D Ex
td A20 (Ex iaD) 20 T125°C
(Request
Certificate for full details).
|
