DIGIMATIC DML4(A) CAPACITANCE LEVEL PROBE - Specification
Fixed point capacitive level control suitable for detecting liquids, powders & granular solids. Automatic high/low level calibration with full manual override. LED display shows calibration & run mode readings. Power shield compensator, prevents false signalling due to material build-up on probe rod. Available with long or short power shirld, flush probe mounting or with clear viewing lid (display is visible through viewing windows to avoid cover removal. ATEX approved.
Supply
110/230V ac, 24V dc
Load
1.5A max, 50 mA dc
Ambient Temp.
-10°C to +50°C
Output
SPCO relay rated @ 2.5A 240V ac non-inductive
Output Mode
Switch selectable for normally ON (high level),
or normall off (low level)
Calibration
Membrane pushbuttons with LED display. Automatic calibration with full manual override
Indicators
Digital display for calibration and run mode settings, plus power, timer and output LED's
Mounting
1" BSP
Protection
IP65
Compensator
Power shield compensates for material build up between probe and vessel wall (earth/ground). Prevents false signalling. Ideal for sticky or viscous materials
Weight

DML4(A)W - 2Kg
200mm rod - 0.25Kg
300mm rod - 0.25Kg
1 metre rod - 1.50Kg
2 metre rod - 3.00Kg
10 metre wire rope - 1.75Kg
Options/Type

Standard: DML4(A)W
Standard unit with non-window Lid: DML4(A)
Short power shield: add 'S' at end - DML4AS
Flush mounting: add 'F' at end - DML4AF
eg:Short power shield with clear lid: DML4ASW
Flush mounting with clear lid: DML4AFW

DML4(A) Certification



© SYNATEL


This is one page of our multi-page website. If you have landed here by accident click on the 'SYNATEL' logo above to view our full site. e&oe.

Synatel:
Design, manufacture & sell a range of sensors aimed at solving detection problems within the day to day working environment.
Photoelectric sensors: retro-reflex, reflex and through beam versions.
Proximity sensors: both inductive and capacitive.
Speed monitors: inductive sensor based, monitoring rotating or reciprocating equipment and providing a signal at stop, under or over speed.
Digital diplay: used for counting, batching routing or speed indication, control applications.
Level controls: capacitance or inductive level sensors ideal for liquids, powders or granular solids.

Our manufacturing facility also enables us to offer a full bespoke design and manufacturing service, if required.