AC/DC INDUCTIVE PROXIMITY SENSORS - Specification
Consists of 18mm (M) and 30mm (T), 2 wire versions (24-240V ac/dc), plus DIN standard limit switch package (12-240V dc/24/240V ac) with relay output.
 
I#1MZ(A)
(18mm)
I#1TZ(A)I
(30mm)
UD1DR
(Limit Switch)
Supply
24-240V ac/dc
12-240V dc
24-240V ac
Output
2 wire FET
SPCO Relay
Output State #
# - 'D' normally OFF, # -'E' normally ON.
Normally OFF
Output Rating
200mA maximum
2.5A 240V ac max.
Output Range
8mm
12mm
Hysterisis
15% of operating range
Ambient Temp.
-15°C to +50°C
IP rating
IP65
No. of Cores
2
5
Weight
260g
300g
325g
Approval ATEX 1D for Explosive Dust hazard use. ATEX 1D & IECEx for Explosive Dust hazard use.
N/A
Note: To prevent damage to units, 2 wire sensors MUST be wired in series with a load/relay/contactor and NOT directly across supply being used.
Note: I#1MZ(A) are also available with Gas Hazard approval - units becomes I#1MZ(AG).
Certrification




© SYNATEL

This is one page of our multi-page website. If you have landed here by accident click on the 'SYNATEL' logo above to view our full site. e&oe.

Synatel : Cannock : UK | +44 (0) 1543 277003 | www.synatel.co.uk
Design, manufacture & sell a range of sensors aimed at solving detection problems within the day to day working environment.
Photoelectric sensors: retro-reflex, reflex and through beam versions.
Proximity sensors: both inductive and capacitive.
Speed monitors: inductive sensor based, monitoring rotating or reciprocating equipment and providing a signal at stop, under or over speed.
Digital diplay: used for counting, batching routing or speed indication, control applications.
Level controls: capacitance or inductive level sensors ideal for liquids, powders or granular solids.

Our manufacturing facility also enables us to offer a full bespoke design and manufacturing service, if required.